Skip to content

Latest commit

 

History

History
39 lines (31 loc) · 2.8 KB

README.md

File metadata and controls

39 lines (31 loc) · 2.8 KB

Build_special_firmware

Tasmota logoTasmota logo

These special Tasmota binaries are not official stable releases

⚠️ No support/warranty with these binaries! ⚠️

Build_special_firmware

The special firmware files are here. Source code

Official ✨ Tasmota ✨ firmware files are here

For easy flashing Tasmota use:

Build variants:

  • tasmota32c2 - Support for ESP32-C2 2M/4M
  • tasmota32c3 - Support for ESP32-C3 2M no OTA variant (tasmota32c3_2M)
  • tasmota32(c3/s3)-bluetooth - Support for BLE
  • tasmota-battery - extremely cut down build for battery powered Tuya sensors
  • tasmota32(c3/s2/s3/c6)-teleinfo - (ESP32 only) for Teleinfo French metering system, MQTT and TLS included
  • tasmota32-zigbeebridge - ESP32 based ZigbeeBridge
  • tasmota-zigbee - Zigbee for TI based chips (Esp8266 and ESP32)
  • tasmota-minicustom - even smaller minimal build, only for Updates (warning MQTT only! No Webserver)
  • tasmota-gps - GPS driver enabled
  • tasmota-mega - big binary, almost every sensor included, OTA possible only with minimal
  • tasmota-allsensors - guess whats in ;-)
  • tasmota-platinum - IT...IS...HUGE!!! nearly everything is enabled (only for devices with >=4Mb flash)
  • tasmota-titanium - as platinum with scripting enabled
  • tasmota-rangeextender - Experimental build where Tasmota acts as AP range extender
  • tasmota-scripting - all scripting features instead of rules + Smart Meter Interface enabled
  • tasmota-thermostat - Thermostat driver and temperature sensors (ESP32 has Bluetooth included)
  • tasmota32solo1-thermostat - ESP32 Single Core Thermostat driver and Bluetooth temperature sensors (used on Shelly Plus 1PM for example)
  • tasmota-teleinfo - For Teleinfo French metering system, MQTT enabled but No TLS due to lack of ressources
  • tasmota-tls - MQTT TLS enabled
  • tasmota32(c3/s3)-mi - Support for MI BLE devices