🏆T-Embed-CC1101🏆

• 切换到中文版

1️⃣Product 🎁

Product	T-Embed-CC1101
Module	ESP32-S3-WROOM-1U
Flash	16MB
PSRAM	8MB
Screen	320x170

Wireless transceiver：

T-Embed-CC1101 has a built-in Sub-GHz module based on a CC1101 transceiver and a radio antenna (the maximum range is 50 meters). Both the CC1101 chip and the antenna are designed to operate at frequencies in the 300-348 MHz, 387-464 MHz, and 779-928 MHz bands.

The Sub-GHz application supports external radio modules based on the CC1101 transceiver.

Folder structure:

├─boards  : Some information about the board for the platformio.ini configuration project;
├─data    : Picture resources used by the program;
├─example : Some examples;
├─firmare : `factory` compiled firmware;
├─hardware: Schematic diagram of the board, chip data;
├─lib     : Libraries used in the project;

2️⃣ Example 🎯

Some examples are provided under the Project example folder, which can run on PlatformIO (PIO) and Arduion, but I prefer to use PIO because these examples are developed on PIO, All examples can run on PIO, However, you may encounter compilation errors on Arduion, but don't worry, the author will step up to test the compilation of Arduion environment.

Examples of compilation in Arduion environment:

• ✅ bq25896_test : Battery management test. Print the battery status in the serial port.
• ✅ cc1101_recv_irq ：Wireless reception test, display received messages in the serial port.
• ✅ cc1101_send_irq ：Wireless sending test, display sent messages in the serial port.
• ✅ display_test ：Screen display test;
• ✅ encode_test ：encoder tester
• ❌ factory_test ：Factory programs can currently only be compiled and downloaded on PlatformIO;
• ✅ infrared_recv_test: Infrared test
• ✅ infrared_send_test: Infrared test
• ✅ lvgl_test ：lvgl benchmark and stress testing;
• ✅ pn532_test ：NFC test, display the IC card information in the serial port.
• ✅ tf_card_test ：SD card test, the file name is displayed in the serial port.
• ✅ record_test : Record 15 seconds of audio and save it to your SD card.
• ✅ voice_test : Speaker test, read audio from SD card.
• ✅ ws2812_test ：LED light test;

3️⃣ PlatformIO Quick Start

1. Install Visual Studio Code and Python, and clone or download the project;
2. Search for the PlatformIO plugin in the VisualStudioCode extension and install it;
3. After the installation is complete, you need to restart VisualStudioCode
4. After opening this project, PlatformIO will automatically download the required tripartite libraries and dependencies, the first time this process is relatively long, please wait patiently;
5. After all the dependencies are installed, you can open the platformio.ini configuration file, uncomment in example to select a routine, and then press ctrl+s to save the .ini configuration file;
6. Click ☑️ under VScode to compile the project, then plug in USB and select COM under VScode;
7. Finally, click the ➡️ button to download the program to Flash;

4️⃣ Arduion Quick Start

❗ ❗ ❗ Notice: PlatformIO is more recommended because it may not be compiled with Arduion. You can refer to 2️⃣-Example to see which examples are successfully compiled in Arduion environment.

1. Install Arduino IDE
2. Install the esp32 toolkit, open the Arduion IDE, click on File->Perferences, Then https://espressif.github.io/arduino-esp32/package_esp32_index.json paste to the position of the diagram below, then click 🆗, waiting for the toolkit download is complete;

3. Copy all files under this project/lib/ and paste them into the Arduion library path (generally C:\Users\YourName\Documents\Arduino\libraries);
4. Open the Arduion IDE and click File->Open in the upper left corner to open an example in this project/example/xxx/xxx.ino under this item;
5. Then configure Arduion. After the configuration is completed in the following way, you can click the button in the upper left corner of Arduion to compile and download;

5️⃣ Other

To be added...