Pulse Sensor Arduino Code

1. Blinks an LED to User's Live Heartbeat
2. Fades an LED to User's Live HeartBeat
3. Determines BPM
4. Prints All of the Above to Serial

Screen Shot

Installing

1. Download ZIP on this page:

2. Take the PulseSensor_Amped_Arduino-master.zip file, and move it to your Documents/Arduino folder.

3. Unzip PulseSensor_Amped_Arduino-master.zip in your Documents/Arduino folder.
   This properly installs your files

• Double-click on PulseSensorAmped_Arduino_1dot2.ino

• Or, 0pen project in *Arduino via File > Sketchbook > PulseSensor_Arduino-Master > PulseSensorAmped_Arduino_1dot2.ino

Pulse Sensor Hook-up

Arduino Pin	Pulse Sensor Cable Color
RED	5V or 3V
BLACK	GND (GROUND)
PURPLE	ANALOG 0 (Zero)

Ear-Clip or Finger-Strap Config

##Variables to Note

Variable Name	What it does
Signal	Int that holds **raw Analog Input data on Pin 0, the Pulse Sensor's Purple Cable. It's updated every 2mS.
BPM	Int that holds the heart-rate value, derived every beat, from averaging previous 10 IBI values.
IBI	Int that holds the time interval between beats! Must be seeded!
Pulse	Boolean that is true when a heartbeat is sensed. It's false other times. It controls LED Pin 13.
QS	Boolean that is true whenever Pulse is found and BPM is updated. User must reset.

Works with Pulse Sensor Apps

This Arduion App works with:

• Works with our Processing App "Processing Visualizer"
• Works with our Pulse Sensor Mac App "Pulse Sensor Mac App"
• Works with any third-party serial reader.

ASCII Serial Monitor Visuals

See the User's Pulse & BPM without leaving Arduino. Open the serial monitor for this ASCII visualization.

• To Open Serial Monitor: Arduino >> Tools >> Serial Monitor

To Turn On ASCII Visualizer:

// Regards Serial OutPut  -- Set This Up to your needs
static boolean serialVisual = false;   // Set to 'false' by Default. 

too:

// Regards Serial OutPut  -- Set This Up to your needs
static boolean serialVisual = true;   // Re-set to 'true' to do ASCII Visual Pulse  : ) 

That's it's! Upload and open your Arduino Serial Monitor.

(Advanced) Timer Interrupt Notes / PWM on Pin 3 & 11

There is a tab in the Arduino code called Timer_Interrupt_Notes. This page describes how to set up the Timer interrupt depending on which version of Arduino you are using, and what other things you may want to do with your sketch. Please read it carefully!

PWM on pins 3 and 11 will not work when using this code, because we are using Timer 2!

The Video

"The Pulse Sensor in 60 Seconds"